diff options
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k.h | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 14 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_main.c | 60 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_mbx.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 31 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 75 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 34 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_type.h | 17 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_vf.c | 33 |
10 files changed, 211 insertions, 69 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h index 48809e5d3f79..fa26e20445a5 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -164,14 +164,20 @@ struct fm10k_ring_container { unsigned int total_packets; /* total packets processed this int */ u16 work_limit; /* total work allowed per interrupt */ u16 itr; /* interrupt throttle rate value */ + u8 itr_scale; /* ITR adjustment scaler based on PCI speed */ u8 count; /* total number of rings in vector */ }; #define FM10K_ITR_MAX 0x0FFF /* maximum value for ITR */ #define FM10K_ITR_10K 100 /* 100us */ #define FM10K_ITR_20K 50 /* 50us */ +#define FM10K_ITR_40K 25 /* 25us */ #define FM10K_ITR_ADAPTIVE 0x8000 /* adaptive interrupt moderation flag */ +#define ITR_IS_ADAPTIVE(itr) (!!(itr & FM10K_ITR_ADAPTIVE)) + +#define FM10K_TX_ITR_DEFAULT FM10K_ITR_40K +#define FM10K_RX_ITR_DEFAULT FM10K_ITR_20K #define FM10K_ITR_ENABLE (FM10K_ITR_AUTOMASK | FM10K_ITR_MASK_CLEAR) static inline struct netdev_queue *txring_txq(const struct fm10k_ring *ring) @@ -484,7 +490,7 @@ void fm10k_netpoll(struct net_device *netdev); #endif /* Netdev */ -struct net_device *fm10k_alloc_netdev(void); +struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info); int fm10k_setup_rx_resources(struct fm10k_ring *); int fm10k_setup_tx_resources(struct fm10k_ring *); void fm10k_free_rx_resources(struct fm10k_ring *); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c b/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c index 2ce0eba5e040..109e2111bdda 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c @@ -111,12 +111,14 @@ static const struct fm10k_stats fm10k_gstrings_pf_stats[] = { static const struct fm10k_stats fm10k_gstrings_mbx_stats[] = { FM10K_MBX_STAT("mbx_tx_busy", tx_busy), - FM10K_MBX_STAT("mbx_tx_oversized", tx_dropped), + FM10K_MBX_STAT("mbx_tx_dropped", tx_dropped), FM10K_MBX_STAT("mbx_tx_messages", tx_messages), FM10K_MBX_STAT("mbx_tx_dwords", tx_dwords), + FM10K_MBX_STAT("mbx_tx_mbmem_pulled", tx_mbmem_pulled), FM10K_MBX_STAT("mbx_rx_messages", rx_messages), FM10K_MBX_STAT("mbx_rx_dwords", rx_dwords), FM10K_MBX_STAT("mbx_rx_parse_err", rx_parse_err), + FM10K_MBX_STAT("mbx_rx_mbmem_pushed", rx_mbmem_pushed), }; #define FM10K_GLOBAL_STATS_LEN ARRAY_SIZE(fm10k_gstrings_global_stats) @@ -699,12 +701,10 @@ static int fm10k_get_coalesce(struct net_device *dev, { struct fm10k_intfc *interface = netdev_priv(dev); - ec->use_adaptive_tx_coalesce = - !!(interface->tx_itr & FM10K_ITR_ADAPTIVE); + ec->use_adaptive_tx_coalesce = ITR_IS_ADAPTIVE(interface->tx_itr); ec->tx_coalesce_usecs = interface->tx_itr & ~FM10K_ITR_ADAPTIVE; - ec->use_adaptive_rx_coalesce = - !!(interface->rx_itr & FM10K_ITR_ADAPTIVE); + ec->use_adaptive_rx_coalesce = ITR_IS_ADAPTIVE(interface->rx_itr); ec->rx_coalesce_usecs = interface->rx_itr & ~FM10K_ITR_ADAPTIVE; return 0; @@ -729,10 +729,10 @@ static int fm10k_set_coalesce(struct net_device *dev, /* set initial values for adaptive ITR */ if (ec->use_adaptive_tx_coalesce) - tx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_10K; + tx_itr = FM10K_ITR_ADAPTIVE | FM10K_TX_ITR_DEFAULT; if (ec->use_adaptive_rx_coalesce) - rx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_20K; + rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT; /* update interface */ interface->tx_itr = tx_itr; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c index 746a1986690b..1c17b6284daa 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -1094,11 +1094,11 @@ dma_error: netdev_tx_t fm10k_xmit_frame_ring(struct sk_buff *skb, struct fm10k_ring *tx_ring) { + u16 count = TXD_USE_COUNT(skb_headlen(skb)); struct fm10k_tx_buffer *first; - int tso; - u32 tx_flags = 0; unsigned short f; - u16 count = TXD_USE_COUNT(skb_headlen(skb)); + u32 tx_flags = 0; + int tso; /* need: 1 descriptor per page * PAGE_SIZE/FM10K_MAX_DATA_PER_TXD, * + 1 desc for skb_headlen/FM10K_MAX_DATA_PER_TXD, @@ -1363,10 +1363,10 @@ static bool fm10k_clean_tx_irq(struct fm10k_q_vector *q_vector, **/ static void fm10k_update_itr(struct fm10k_ring_container *ring_container) { - unsigned int avg_wire_size, packets; + unsigned int avg_wire_size, packets, itr_round; /* Only update ITR if we are using adaptive setting */ - if (!(ring_container->itr & FM10K_ITR_ADAPTIVE)) + if (!ITR_IS_ADAPTIVE(ring_container->itr)) goto clear_counts; packets = ring_container->total_packets; @@ -1375,18 +1375,44 @@ static void fm10k_update_itr(struct fm10k_ring_container *ring_container) avg_wire_size = ring_container->total_bytes / packets; - /* Add 24 bytes to size to account for CRC, preamble, and gap */ - avg_wire_size += 24; - - /* Don't starve jumbo frames */ - if (avg_wire_size > 3000) - avg_wire_size = 3000; + /* The following is a crude approximation of: + * wmem_default / (size + overhead) = desired_pkts_per_int + * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate + * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value + * + * Assuming wmem_default is 212992 and overhead is 640 bytes per + * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the + * formula down to + * + * (34 * (size + 24)) / (size + 640) = ITR + * + * We first do some math on the packet size and then finally bitshift + * by 8 after rounding up. We also have to account for PCIe link speed + * difference as ITR scales based on this. + */ + if (avg_wire_size <= 360) { + /* Start at 250K ints/sec and gradually drop to 77K ints/sec */ + avg_wire_size *= 8; + avg_wire_size += 376; + } else if (avg_wire_size <= 1152) { + /* 77K ints/sec to 45K ints/sec */ + avg_wire_size *= 3; + avg_wire_size += 2176; + } else if (avg_wire_size <= 1920) { + /* 45K ints/sec to 38K ints/sec */ + avg_wire_size += 4480; + } else { + /* plateau at a limit of 38K ints/sec */ + avg_wire_size = 6656; + } - /* Give a little boost to mid-size frames */ - if ((avg_wire_size > 300) && (avg_wire_size < 1200)) - avg_wire_size /= 3; - else - avg_wire_size /= 2; + /* Perform final bitshift for division after rounding up to ensure + * that the calculation will never get below a 1. The bit shift + * accounts for changes in the ITR due to PCIe link speed. + */ + itr_round = ACCESS_ONCE(ring_container->itr_scale) + 8; + avg_wire_size += (1 << itr_round) - 1; + avg_wire_size >>= itr_round; /* write back value and retain adaptive flag */ ring_container->itr = avg_wire_size | FM10K_ITR_ADAPTIVE; @@ -1604,6 +1630,7 @@ static int fm10k_alloc_q_vector(struct fm10k_intfc *interface, q_vector->tx.ring = ring; q_vector->tx.work_limit = FM10K_DEFAULT_TX_WORK; q_vector->tx.itr = interface->tx_itr; + q_vector->tx.itr_scale = interface->hw.mac.itr_scale; q_vector->tx.count = txr_count; while (txr_count) { @@ -1632,6 +1659,7 @@ static int fm10k_alloc_q_vector(struct fm10k_intfc *interface, /* save Rx ring container info */ q_vector->rx.ring = ring; q_vector->rx.itr = interface->rx_itr; + q_vector->rx.itr_scale = interface->hw.mac.itr_scale; q_vector->rx.count = rxr_count; while (rxr_count) { diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c index af09a1b272e6..2bce47490723 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c @@ -375,6 +375,8 @@ static void fm10k_mbx_write_copy(struct fm10k_hw *hw, if (!tail) tail++; + mbx->tx_mbmem_pulled++; + /* write message to hardware FIFO */ fm10k_write_reg(hw, mbmem + tail++, *(head++)); } while (--len && --end); @@ -459,6 +461,8 @@ static void fm10k_mbx_read_copy(struct fm10k_hw *hw, if (!head) head++; + mbx->rx_mbmem_pushed++; + /* read message from hardware FIFO */ *(tail++) = fm10k_read_reg(hw, mbmem + head++); } while (--len && --end); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h index 0419a7f0035e..c4f18a8f176c 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h @@ -1,5 +1,5 @@ /* Intel Ethernet Switch Host Interface Driver - * Copyright(c) 2013 - 2014 Intel Corporation. + * Copyright(c) 2013 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -291,8 +291,10 @@ struct fm10k_mbx_info { u64 tx_dropped; u64 tx_messages; u64 tx_dwords; + u64 tx_mbmem_pulled; u64 rx_messages; u64 rx_dwords; + u64 rx_mbmem_pushed; u64 rx_parse_err; /* Buffer to store messages */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c index 7781e80896a6..79f6b7dd2362 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c @@ -1388,8 +1388,9 @@ static const struct net_device_ops fm10k_netdev_ops = { #define DEFAULT_DEBUG_LEVEL_SHIFT 3 -struct net_device *fm10k_alloc_netdev(void) +struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info) { + netdev_features_t hw_features; struct fm10k_intfc *interface; struct net_device *dev; @@ -1412,27 +1413,31 @@ struct net_device *fm10k_alloc_netdev(void) NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN | - NETIF_F_GSO_UDP_TUNNEL | NETIF_F_RXHASH | NETIF_F_RXCSUM; + /* Only the PF can support VXLAN and NVGRE tunnel offloads */ + if (info->mac == fm10k_mac_pf) { + dev->hw_enc_features = NETIF_F_IP_CSUM | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_TSO_ECN | + NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_IPV6_CSUM | + NETIF_F_SG; + + dev->features |= NETIF_F_GSO_UDP_TUNNEL; + } + /* all features defined to this point should be changeable */ - dev->hw_features |= dev->features; + hw_features = dev->features; /* allow user to enable L2 forwarding acceleration */ - dev->hw_features |= NETIF_F_HW_L2FW_DOFFLOAD; + hw_features |= NETIF_F_HW_L2FW_DOFFLOAD; /* configure VLAN features */ dev->vlan_features |= dev->features; - /* configure tunnel offloads */ - dev->hw_enc_features |= NETIF_F_IP_CSUM | - NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_TSO_ECN | - NETIF_F_GSO_UDP_TUNNEL | - NETIF_F_IPV6_CSUM; - /* we want to leave these both on as we cannot disable VLAN tag * insertion or stripping on the hardware since it is contained * in the FTAG and not in the frame itself. @@ -1443,5 +1448,7 @@ struct net_device *fm10k_alloc_netdev(void) dev->priv_flags |= IFF_UNICAST_FLT; + dev->hw_features |= hw_features; + return dev; } diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 5fbffbaefe32..15d8e10c2504 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -159,13 +159,30 @@ static void fm10k_reinit(struct fm10k_intfc *interface) fm10k_mbx_free_irq(interface); + /* free interrupts */ + fm10k_clear_queueing_scheme(interface); + /* delay any future reset requests */ interface->last_reset = jiffies + (10 * HZ); /* reset and initialize the hardware so it is in a known state */ - err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw); - if (err) + err = hw->mac.ops.reset_hw(hw); + if (err) { + dev_err(&interface->pdev->dev, "reset_hw failed: %d\n", err); + goto reinit_err; + } + + err = hw->mac.ops.init_hw(hw); + if (err) { dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err); + goto reinit_err; + } + + err = fm10k_init_queueing_scheme(interface); + if (err) { + dev_err(&interface->pdev->dev, "init_queueing_scheme failed: %d\n", err); + goto reinit_err; + } /* reassociate interrupts */ fm10k_mbx_request_irq(interface); @@ -193,6 +210,10 @@ static void fm10k_reinit(struct fm10k_intfc *interface) fm10k_iov_resume(interface->pdev); +reinit_err: + if (err) + netif_device_detach(netdev); + rtnl_unlock(); clear_bit(__FM10K_RESETTING, &interface->state); @@ -563,7 +584,7 @@ static void fm10k_configure_tx_ring(struct fm10k_intfc *interface, /* store tail pointer */ ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)]; - /* reset ntu and ntc to place SW in sync with hardwdare */ + /* reset ntu and ntc to place SW in sync with hardware */ ring->next_to_clean = 0; ring->next_to_use = 0; @@ -669,7 +690,7 @@ static void fm10k_configure_rx_ring(struct fm10k_intfc *interface, /* store tail pointer */ ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)]; - /* reset ntu and ntc to place SW in sync with hardwdare */ + /* reset ntu and ntc to place SW in sync with hardware */ ring->next_to_clean = 0; ring->next_to_use = 0; ring->next_to_alloc = 0; @@ -859,7 +880,8 @@ static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data) /* re-enable mailbox interrupt and indicate 20us delay */ fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR), - FM10K_ITR_ENABLE | FM10K_MBX_INT_DELAY); + FM10K_ITR_ENABLE | (FM10K_MBX_INT_DELAY >> + hw->mac.itr_scale)); /* service upstream mailbox */ if (fm10k_mbx_trylock(interface)) { @@ -1090,7 +1112,8 @@ static irqreturn_t fm10k_msix_mbx_pf(int __always_unused irq, void *data) /* re-enable mailbox interrupt and indicate 20us delay */ fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR), - FM10K_ITR_ENABLE | FM10K_MBX_INT_DELAY); + FM10K_ITR_ENABLE | (FM10K_MBX_INT_DELAY >> + hw->mac.itr_scale)); return IRQ_HANDLED; } @@ -1684,7 +1707,13 @@ static int fm10k_sw_init(struct fm10k_intfc *interface, interface->last_reset = jiffies + (10 * HZ); /* reset and initialize the hardware so it is in a known state */ - err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw); + err = hw->mac.ops.reset_hw(hw); + if (err) { + dev_err(&pdev->dev, "reset_hw failed: %d\n", err); + return err; + } + + err = hw->mac.ops.init_hw(hw); if (err) { dev_err(&pdev->dev, "init_hw failed: %d\n", err); return err; @@ -1722,13 +1751,6 @@ static int fm10k_sw_init(struct fm10k_intfc *interface, pci_resource_len(pdev, 4)); hw->sw_addr = interface->sw_addr; - /* Only the PF can support VXLAN and NVGRE offloads */ - if (hw->mac.type != fm10k_mac_pf) { - netdev->hw_enc_features = 0; - netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL; - netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL; - } - /* initialize DCBNL interface */ fm10k_dcbnl_set_ops(netdev); @@ -1749,8 +1771,8 @@ static int fm10k_sw_init(struct fm10k_intfc *interface, interface->rx_ring_count = FM10K_DEFAULT_RXD; /* set default interrupt moderation */ - interface->tx_itr = FM10K_ITR_10K; - interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_20K; + interface->tx_itr = FM10K_TX_ITR_DEFAULT; + interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT; /* initialize vxlan_port list */ INIT_LIST_HEAD(&interface->vxlan_port); @@ -1894,7 +1916,7 @@ static int fm10k_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_save_state(pdev); - netdev = fm10k_alloc_netdev(); + netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]); if (!netdev) { err = -ENOMEM; goto err_alloc_netdev; @@ -2071,8 +2093,10 @@ static int fm10k_resume(struct pci_dev *pdev) /* reset hardware to known state */ err = hw->mac.ops.init_hw(&interface->hw); - if (err) + if (err) { + dev_err(&pdev->dev, "init_hw failed: %d\n", err); return err; + } /* reset statistics starting values */ hw->mac.ops.rebind_hw_stats(hw, &interface->stats); @@ -2185,6 +2209,9 @@ static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev, if (netif_running(netdev)) fm10k_close(netdev); + /* free interrupts */ + fm10k_clear_queueing_scheme(interface); + fm10k_mbx_free_irq(interface); pci_disable_device(pdev); @@ -2248,11 +2275,21 @@ static void fm10k_io_resume(struct pci_dev *pdev) int err = 0; /* reset hardware to known state */ - hw->mac.ops.init_hw(&interface->hw); + err = hw->mac.ops.init_hw(&interface->hw); + if (err) { + dev_err(&pdev->dev, "init_hw failed: %d\n", err); + return; + } /* reset statistics starting values */ hw->mac.ops.rebind_hw_stats(hw, &interface->stats); + err = fm10k_init_queueing_scheme(interface); + if (err) { + dev_err(&interface->pdev->dev, "init_queueing_scheme failed: %d\n", err); + return; + } + /* reassociate interrupts */ fm10k_mbx_request_irq(interface); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index 8c0bdc4e4edd..8b9b6ba5b92b 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -1,5 +1,5 @@ /* Intel Ethernet Switch Host Interface Driver - * Copyright(c) 2013 - 2014 Intel Corporation. + * Copyright(c) 2013 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -150,19 +150,26 @@ static s32 fm10k_init_hw_pf(struct fm10k_hw *hw) FM10K_TPH_RXCTRL_HDR_WROEN); } - /* set max hold interval to align with 1.024 usec in all modes */ + /* set max hold interval to align with 1.024 usec in all modes and + * store ITR scale + */ switch (hw->bus.speed) { case fm10k_bus_speed_2500: dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1; + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN1; break; case fm10k_bus_speed_5000: dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2; + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN2; break; case fm10k_bus_speed_8000: dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3; + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3; break; default: dma_ctrl = 0; + /* just in case, assume Gen3 ITR scale */ + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3; break; } @@ -334,8 +341,8 @@ static s32 fm10k_update_xc_addr_pf(struct fm10k_hw *hw, u16 glort, ((u32)mac[3] << 16) | ((u32)mac[4] << 8) | ((u32)mac[5])); - mac_update.mac_upper = cpu_to_le16(((u32)mac[0] << 8) | - ((u32)mac[1])); + mac_update.mac_upper = cpu_to_le16(((u16)mac[0] << 8) | + ((u16)mac[1])); mac_update.vlan = cpu_to_le16(vid); mac_update.glort = cpu_to_le16(glort); mac_update.action = add ? 0 : 1; @@ -903,6 +910,13 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx), tdbal); fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx), tdbah); + /* Provide the VF the ITR scale, using software-defined fields in TDLEN + * to pass the information during VF initialization. See definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more details. + */ + fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx), hw->mac.itr_scale << + FM10K_TDLEN_ITR_SCALE_SHIFT); + err_out: /* configure Queue control register */ txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & @@ -1035,6 +1049,12 @@ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, for (i = queues_per_pool; i--;) { fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx + i), tdbal); fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx + i), tdbah); + /* See definition of FM10K_TDLEN_ITR_SCALE_SHIFT for an + * explanation of how TDLEN is used. + */ + fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx + i), + hw->mac.itr_scale << + FM10K_TDLEN_ITR_SCALE_SHIFT); fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx + i); fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i); } @@ -1212,7 +1232,7 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, set = !(vid & FM10K_VLAN_CLEAR); vid &= ~FM10K_VLAN_CLEAR; - err = fm10k_iov_select_vid(vf_info, vid); + err = fm10k_iov_select_vid(vf_info, (u16)vid); if (err < 0) return err; else @@ -1242,7 +1262,7 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, if (err < 0) return err; else - vlan = err; + vlan = (u16)err; /* notify switch of request for new unicast address */ err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, @@ -1268,7 +1288,7 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, if (err < 0) return err; else - vlan = err; + vlan = (u16)err; /* notify switch of request for new multicast address */ err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_type.h b/drivers/net/ethernet/intel/fm10k/fm10k_type.h index 35afd711d144..02727250ce1f 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_type.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k_type.h @@ -1,5 +1,5 @@ /* Intel Ethernet Switch Host Interface Driver - * Copyright(c) 2013 - 2014 Intel Corporation. + * Copyright(c) 2013 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -272,6 +272,20 @@ struct fm10k_hw; #define FM10K_TDBAL(_n) ((0x40 * (_n)) + 0x8000) #define FM10K_TDBAH(_n) ((0x40 * (_n)) + 0x8001) #define FM10K_TDLEN(_n) ((0x40 * (_n)) + 0x8002) +/* When fist initialized, VFs need to know the Interrupt Throttle Rate (ITR) + * scale which is based on the PCIe speed but the speed information in the PCI + * configuration space may not be accurate. The PF already knows the ITR scale + * but there is no defined method to pass that information from the PF to the + * VF. This is accomplished during VF initialization by temporarily co-opting + * the yet-to-be-used TDLEN register to have the PF store the ITR shift for + * the VF to retrieve before the VF needs to use the TDLEN register for its + * intended purpose, i.e. before the Tx resources are allocated. + */ +#define FM10K_TDLEN_ITR_SCALE_SHIFT 9 +#define FM10K_TDLEN_ITR_SCALE_MASK 0x00000E00 +#define FM10K_TDLEN_ITR_SCALE_GEN1 2 +#define FM10K_TDLEN_ITR_SCALE_GEN2 1 +#define FM10K_TDLEN_ITR_SCALE_GEN3 0 #define FM10K_TPH_TXCTRL(_n) ((0x40 * (_n)) + 0x8003) #define FM10K_TPH_TXCTRL_DESC_TPHEN 0x00000020 #define FM10K_TPH_TXCTRL_DESC_RROEN 0x00000200 @@ -560,6 +574,7 @@ struct fm10k_mac_info { bool get_host_state; bool tx_ready; u32 dglort_map; + u8 itr_scale; }; struct fm10k_swapi_table_info { diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c index 3a18ef1cc017..2af697df5abc 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c @@ -28,7 +28,7 @@ static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) { u8 *perm_addr = hw->mac.perm_addr; - u32 bal = 0, bah = 0; + u32 bal = 0, bah = 0, tdlen; s32 err; u16 i; @@ -48,6 +48,9 @@ static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) ((u32)perm_addr[2]); } + /* restore default itr_scale for next VF initialization */ + tdlen = hw->mac.itr_scale << FM10K_TDLEN_ITR_SCALE_SHIFT; + /* The queues have already been disabled so we just need to * update their base address registers */ @@ -56,6 +59,12 @@ static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) fm10k_write_reg(hw, FM10K_TDBAH(i), bah); fm10k_write_reg(hw, FM10K_RDBAL(i), bal); fm10k_write_reg(hw, FM10K_RDBAH(i), bah); + /* Restore ITR scale in software-defined mechanism in TDLEN + * for next VF initialization. See definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more details on the use of + * TDLEN here. + */ + fm10k_write_reg(hw, FM10K_TDLEN(i), tdlen); } return 0; @@ -105,8 +114,10 @@ static s32 fm10k_init_hw_vf(struct fm10k_hw *hw) /* verify we have at least 1 queue */ if (!~fm10k_read_reg(hw, FM10K_TXQCTL(0)) || - !~fm10k_read_reg(hw, FM10K_RXQCTL(0))) - return FM10K_ERR_NO_RESOURCES; + !~fm10k_read_reg(hw, FM10K_RXQCTL(0))) { + err = FM10K_ERR_NO_RESOURCES; + goto reset_max_queues; + } /* determine how many queues we have */ for (i = 1; tqdloc0 && (i < FM10K_MAX_QUEUES_POOL); i++) { @@ -124,16 +135,28 @@ static s32 fm10k_init_hw_vf(struct fm10k_hw *hw) /* shut down queues we own and reset DMA configuration */ err = fm10k_disable_queues_generic(hw, i); if (err) - return err; + goto reset_max_queues; /* record maximum queue count */ hw->mac.max_queues = i; - /* fetch default VLAN */ + /* fetch default VLAN and ITR scale */ hw->mac.default_vid = (fm10k_read_reg(hw, FM10K_TXQCTL(0)) & FM10K_TXQCTL_VID_MASK) >> FM10K_TXQCTL_VID_SHIFT; + /* Read the ITR scale from TDLEN. See the definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more information about how TDLEN is + * used here. + */ + hw->mac.itr_scale = (fm10k_read_reg(hw, FM10K_TDLEN(0)) & + FM10K_TDLEN_ITR_SCALE_MASK) >> + FM10K_TDLEN_ITR_SCALE_SHIFT; return 0; + +reset_max_queues: + hw->mac.max_queues = 0; + + return err; } /* This structure defines the attibutes to be parsed below */ |