diff options
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 106 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 24 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 |
5 files changed, 71 insertions, 86 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 784eb53361b5..cd9764a6a36f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -49,6 +49,7 @@ struct socfpga_dwmac { u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; + struct reset_control *stmmac_rst; void __iomem *splitter_base; bool f2h_ptp_ref_clk; }; @@ -135,7 +136,7 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device * return 0; } -static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) +static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) { struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr; int phymode = dwmac->interface; @@ -164,6 +165,10 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) if (dwmac->splitter_base) val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; + /* Assert reset to the enet controller before changing the phy mode */ + if (dwmac->stmmac_rst) + reset_control_assert(dwmac->stmmac_rst); + regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); ctrl |= val << reg_shift; @@ -181,57 +186,13 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) regmap_write(sys_mgr_base_addr, reg_offset, ctrl); - return 0; -} - -static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) -{ - struct socfpga_dwmac *dwmac = priv; - struct net_device *ndev = platform_get_drvdata(pdev); - struct stmmac_priv *stpriv = NULL; - int ret = 0; - - if (!ndev) - return -EINVAL; - - stpriv = netdev_priv(ndev); - if (!stpriv) - return -EINVAL; - - /* Assert reset to the enet controller before changing the phy mode */ - if (stpriv->stmmac_rst) - reset_control_assert(stpriv->stmmac_rst); - - /* Setup the phy mode in the system manager registers according to - * devicetree configuration - */ - ret = socfpga_dwmac_setup(dwmac); - /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ - if (stpriv->stmmac_rst) - reset_control_deassert(stpriv->stmmac_rst); - - /* Before the enet controller is suspended, the phy is suspended. - * This causes the phy clock to be gated. The enet controller is - * resumed before the phy, so the clock is still gated "off" when - * the enet controller is resumed. This code makes sure the phy - * is "resumed" before reinitializing the enet controller since - * the enet controller depends on an active phy clock to complete - * a DMA reset. A DMA reset will "time out" if executed - * with no phy clock input on the Synopsys enet controller. - * Verified through Synopsys Case #8000711656. - * - * Note that the phy clock is also gated when the phy is isolated. - * Phy "suspend" and "isolate" controls are located in phy basic - * control register 0, and can be modified by the phy driver - * framework. - */ - if (stpriv->phydev) - phy_resume(stpriv->phydev); + if (dwmac->stmmac_rst) + reset_control_deassert(dwmac->stmmac_rst); - return ret; + return 0; } static int socfpga_dwmac_probe(struct platform_device *pdev) @@ -261,16 +222,57 @@ static int socfpga_dwmac_probe(struct platform_device *pdev) } plat_dat->bsp_priv = dwmac; - plat_dat->init = socfpga_dwmac_init; plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed; ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); - if (!ret) - ret = socfpga_dwmac_init(pdev, dwmac); + if (!ret) { + struct net_device *ndev = platform_get_drvdata(pdev); + struct stmmac_priv *stpriv = netdev_priv(ndev); + + /* The socfpga driver needs to control the stmmac reset to + * set the phy mode. Create a copy of the core reset handel + * so it can be used by the driver later. + */ + dwmac->stmmac_rst = stpriv->stmmac_rst; + + ret = socfpga_dwmac_set_phy_mode(dwmac); + } return ret; } +#ifdef CONFIG_PM_SLEEP +static int socfpga_dwmac_resume(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct stmmac_priv *priv = netdev_priv(ndev); + + socfpga_dwmac_set_phy_mode(priv->plat->bsp_priv); + + /* Before the enet controller is suspended, the phy is suspended. + * This causes the phy clock to be gated. The enet controller is + * resumed before the phy, so the clock is still gated "off" when + * the enet controller is resumed. This code makes sure the phy + * is "resumed" before reinitializing the enet controller since + * the enet controller depends on an active phy clock to complete + * a DMA reset. A DMA reset will "time out" if executed + * with no phy clock input on the Synopsys enet controller. + * Verified through Synopsys Case #8000711656. + * + * Note that the phy clock is also gated when the phy is isolated. + * Phy "suspend" and "isolate" controls are located in phy basic + * control register 0, and can be modified by the phy driver + * framework. + */ + if (priv->phydev) + phy_resume(priv->phydev); + + return stmmac_resume(dev); +} +#endif /* CONFIG_PM_SLEEP */ + +SIMPLE_DEV_PM_OPS(socfpga_dwmac_pm_ops, stmmac_suspend, socfpga_dwmac_resume); + static const struct of_device_id socfpga_dwmac_match[] = { { .compatible = "altr,socfpga-stmmac" }, { } @@ -282,7 +284,7 @@ static struct platform_driver socfpga_dwmac_driver = { .remove = stmmac_pltfr_remove, .driver = { .name = "socfpga-dwmac", - .pm = &stmmac_pltfr_pm_ops, + .pm = &socfpga_dwmac_pm_ops, .of_match_table = socfpga_dwmac_match, }, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index ff6750621ff7..59ae6088cd22 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -148,9 +148,9 @@ void stmmac_set_ethtool_ops(struct net_device *netdev); int stmmac_ptp_register(struct stmmac_priv *priv); void stmmac_ptp_unregister(struct stmmac_priv *priv); -int stmmac_resume(struct net_device *ndev); -int stmmac_suspend(struct net_device *ndev); -int stmmac_dvr_remove(struct net_device *ndev); +int stmmac_resume(struct device *dev); +int stmmac_suspend(struct device *dev); +int stmmac_dvr_remove(struct device *dev); int stmmac_dvr_probe(struct device *device, struct plat_stmmacenet_data *plat_dat, struct stmmac_resources *res); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b87edb72e80a..fd5ab7bfdb76 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3350,12 +3350,13 @@ EXPORT_SYMBOL_GPL(stmmac_dvr_probe); /** * stmmac_dvr_remove - * @ndev: net device pointer + * @dev: device pointer * Description: this function resets the TX/RX processes, disables the MAC RX/TX * changes the link status, releases the DMA descriptor rings. */ -int stmmac_dvr_remove(struct net_device *ndev) +int stmmac_dvr_remove(struct device *dev) { + struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); pr_info("%s:\n\tremoving driver", __func__); @@ -3381,13 +3382,14 @@ EXPORT_SYMBOL_GPL(stmmac_dvr_remove); /** * stmmac_suspend - suspend callback - * @ndev: net device pointer + * @dev: device pointer * Description: this is the function to suspend the device and it is called * by the platform driver to stop the network queue, release the resources, * program the PMT register (for WoL), clean and release driver resources. */ -int stmmac_suspend(struct net_device *ndev) +int stmmac_suspend(struct device *dev) { + struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); unsigned long flags; @@ -3430,12 +3432,13 @@ EXPORT_SYMBOL_GPL(stmmac_suspend); /** * stmmac_resume - resume callback - * @ndev: net device pointer + * @dev: device pointer * Description: when resume this function is invoked to setup the DMA and CORE * in a usable state. */ -int stmmac_resume(struct net_device *ndev) +int stmmac_resume(struct device *dev) { + struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); unsigned long flags; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index ae4388735b7f..56c8a2342c14 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -231,30 +231,10 @@ static int stmmac_pci_probe(struct pci_dev *pdev, */ static void stmmac_pci_remove(struct pci_dev *pdev) { - struct net_device *ndev = pci_get_drvdata(pdev); - - stmmac_dvr_remove(ndev); -} - -#ifdef CONFIG_PM_SLEEP -static int stmmac_pci_suspend(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *ndev = pci_get_drvdata(pdev); - - return stmmac_suspend(ndev); -} - -static int stmmac_pci_resume(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *ndev = pci_get_drvdata(pdev); - - return stmmac_resume(ndev); + stmmac_dvr_remove(&pdev->dev); } -#endif -static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume); +static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_suspend, stmmac_resume); #define STMMAC_VENDOR_ID 0x700 #define STMMAC_QUARK_ID 0x0937 diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index effaa4ff5ab7..409db913b117 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -386,7 +386,7 @@ int stmmac_pltfr_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct stmmac_priv *priv = netdev_priv(ndev); - int ret = stmmac_dvr_remove(ndev); + int ret = stmmac_dvr_remove(&pdev->dev); if (priv->plat->exit) priv->plat->exit(pdev, priv->plat->bsp_priv); @@ -410,7 +410,7 @@ static int stmmac_pltfr_suspend(struct device *dev) struct stmmac_priv *priv = netdev_priv(ndev); struct platform_device *pdev = to_platform_device(dev); - ret = stmmac_suspend(ndev); + ret = stmmac_suspend(dev); if (priv->plat->exit) priv->plat->exit(pdev, priv->plat->bsp_priv); @@ -433,7 +433,7 @@ static int stmmac_pltfr_resume(struct device *dev) if (priv->plat->init) priv->plat->init(pdev, priv->plat->bsp_priv); - return stmmac_resume(ndev); + return stmmac_resume(dev); } #endif /* CONFIG_PM_SLEEP */ |