22 files changed, 331 insertions, 33 deletions
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index 2cfa25667123..15b4a20d5062 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -15,7 +15,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/adt7410 b/Documentation/hwmon/adt7410
index 96004000dc2a..58150c480e56 100644
--- a/Documentation/hwmon/adt7410
+++ b/Documentation/hwmon/adt7410
@@ -4,9 +4,14 @@ Kernel driver adt7410
 Supported chips:
   * Analog Devices ADT7410
     Prefix: 'adt7410'
-    Addresses scanned: I2C 0x48 - 0x4B
+    Addresses scanned: None
     Datasheet: Publicly available at the Analog Devices website
                http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
+  * Analog Devices ADT7420
+    Prefix: 'adt7420'
+    Addresses scanned: None
+    Datasheet: Publicly available at the Analog Devices website
+               http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
 
 Author: Hartmut Knaack <knaack.h@gmx.de>
 
@@ -27,6 +32,10 @@ value per second or even justget one sample on demand for power saving.
 Besides, it can completely power down its ADC, if power management is
 required.
 
+The ADT7420 is register compatible, the only differences being the package,
+a slightly narrower operating temperature range (-40°C to +150°C), and a
+better accuracy (0.25°C instead of 0.50°C.)
+
 Configuration Notes
 -------------------
 
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 3374c085678d..fec5a9bf755f 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -66,6 +66,7 @@ Process		Processor					TjMax(C)
 		i5 3470T					91
 
 32nm		Core i3/i5/i7 Processors
+		i7 2600						98
 		i7 660UM/640/620, 640LM/620, 620M, 610E		105
 		i5 540UM/520/430, 540M/520/450/430		105
 		i3 330E, 370M/350/330				90 rPGA, 105 BGA
@@ -79,7 +80,10 @@ Process		Processor					TjMax(C)
 		P4505/P4500 					90
 
 32nm		Atom Processors
+		S1260/1220					95
+		S1240						102
 		Z2460						90
+		Z2760						90
 		D2700/2550/2500					100
 		N2850/2800/2650/2600				100
 
@@ -98,6 +102,7 @@ Process		Processor					TjMax(C)
 
 45nm		Atom Processors
 		D525/510/425/410				100
+		K525/510/425/410				100
 		Z670/650					90
 		Z560/550/540/530P/530/520PT/520/515/510PT/510P	90
 		Z510/500					90
@@ -107,7 +112,11 @@ Process		Processor					TjMax(C)
 		330/230						125
 		E680/660/640/620				90
 		E680T/660T/640T/620T				110
+		E665C/645C					90
+		E665CT/645CT					110
 		CE4170/4150/4110				110
+		CE4200 series					unknown
+		CE5300 series					unknown
 
 45nm		Core2 Processors
 		Solo ULV SU3500/3300				100
diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209
new file mode 100644
index 000000000000..672501de4509
--- /dev/null
+++ b/Documentation/hwmon/ina209
@@ -0,0 +1,93 @@
+Kernel driver ina209
+=====================
+
+Supported chips:
+  * Burr-Brown / Texas Instruments INA209
+    Prefix: 'ina209'
+    Addresses scanned: -
+    Datasheet:
+        http://www.ti.com/lit/gpn/ina209
+
+Author: Paul Hays <Paul.Hays@cattail.ca>
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side
+of a D.C. power supply. It can perform measurements and calculations in the
+background to supply readings at any time. It includes a programmable
+calibration multiplier to scale the displayed current and power values.
+
+
+Sysfs entries
+-------------
+
+The INA209 chip is highly configurable both via hardwiring and via
+the I2C bus. See the datasheet for details.
+
+This tries to expose most monitoring features of the hardware via
+sysfs. It does not support every feature of this chip.
+
+
+in0_input		shunt voltage (mV)
+in0_input_highest	shunt voltage historical maximum reading (mV)
+in0_input_lowest	shunt voltage historical minimum reading (mV)
+in0_reset_history	reset shunt voltage history
+in0_max			shunt voltage max alarm limit (mV)
+in0_min			shunt voltage min alarm limit (mV)
+in0_crit_max		shunt voltage crit max alarm limit (mV)
+in0_crit_min		shunt voltage crit min alarm limit (mV)
+in0_max_alarm		shunt voltage max alarm limit exceeded
+in0_min_alarm		shunt voltage min alarm limit exceeded
+in0_crit_max_alarm	shunt voltage crit max alarm limit exceeded
+in0_crit_min_alarm	shunt voltage crit min alarm limit exceeded
+
+in1_input		bus voltage (mV)
+in1_input_highest	bus voltage historical maximum reading (mV)
+in1_input_lowest	bus voltage historical minimum reading (mV)
+in1_reset_history	reset bus voltage history
+in1_max			bus voltage max alarm limit (mV)
+in1_min			bus voltage min alarm limit (mV)
+in1_crit_max		bus voltage crit max alarm limit (mV)
+in1_crit_min		bus voltage crit min alarm limit (mV)
+in1_max_alarm		bus voltage max alarm limit exceeded
+in1_min_alarm		bus voltage min alarm limit exceeded
+in1_crit_max_alarm	bus voltage crit max alarm limit exceeded
+in1_crit_min_alarm	bus voltage crit min alarm limit exceeded
+
+power1_input		power measurement (uW)
+power1_input_highest	power historical maximum reading (uW)
+power1_reset_history	reset power history
+power1_max		power max alarm limit (uW)
+power1_crit		power crit alarm limit (uW)
+power1_max_alarm	power max alarm limit exceeded
+power1_crit_alarm	power crit alarm limit exceeded
+
+curr1_input		current measurement (mA)
+
+update_interval		data conversion time; affects number of samples used
+			to average results for shunt and bus voltages.
+
+General Remarks
+---------------
+
+The power and current registers in this chip require that the calibration
+register is programmed correctly before they are used. Normally this is expected
+to be done in the BIOS. In the absence of BIOS programming, the shunt resistor
+voltage can be provided using platform data. The driver uses platform data from
+the ina2xx driver for this purpose. If calibration register data is not provided
+via platform data, the driver checks if the calibration register has been
+programmed (ie has a value not equal to zero). If so, this value is retained.
+Otherwise, a default value reflecting a shunt resistor value of 10 mOhm is
+programmed into the calibration register.
+
+
+Output Pins
+-----------
+
+Output pin programming is a board feature which depends on the BIOS. It is
+outside the scope of a hardware monitoring driver to enable or disable output
+pins.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 8386aadc0a82..c263740f0cba 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -30,6 +30,14 @@ Supported chips:
     Prefix: 'it8728'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8771E
+    Prefix: 'it8771'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
+  * IT8772E
+    Prefix: 'it8772'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * IT8782F
     Prefix: 'it8782'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -83,8 +91,8 @@ Description
 -----------
 
 This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F,
-IT8783E/F, and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, IT8772E,
+IT8782F, IT8783E/F, and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -118,8 +126,8 @@ The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
 to userspace applications.
 
-The IT8728F is considered compatible with the IT8721F, until a datasheet
-becomes available (hopefully.)
+The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
+until a datasheet becomes available (hopefully.)
 
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 66ecb9fc8246..868d74d6b773 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -17,12 +17,13 @@ Supported chips:
   * Maxim MAX6604
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843
     Datasheets:
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf
   * NXP Semiconductors SE97, SE97B, SE98, SE98A
     Datasheets:
 	http://www.nxp.com/documents/data_sheet/SE97.pdf
@@ -48,7 +49,7 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
 
 Author:
-	Guenter Roeck <guenter.roeck@ericsson.com>
+	Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/lineage-pem b/Documentation/hwmon/lineage-pem
index 2ba5ed126858..83b2ddc160c8 100644
--- a/Documentation/hwmon/lineage-pem
+++ b/Documentation/hwmon/lineage-pem
@@ -8,7 +8,7 @@ Supported devices:
     Documentation:
         http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066
index a21db81c4591..26025e419d35 100644
--- a/Documentation/hwmon/lm25066
+++ b/Documentation/hwmon/lm25066
@@ -19,7 +19,7 @@ Supported chips:
     Datasheet:
 	http://www.national.com/pf/LM/LM5066.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/lm73 b/Documentation/hwmon/lm73
new file mode 100644
index 000000000000..8af059dcb642
--- /dev/null
+++ b/Documentation/hwmon/lm73
@@ -0,0 +1,90 @@
+Kernel driver lm73
+==================
+
+Supported chips:
+  * Texas Instruments LM73
+    Prefix: 'lm73'
+    Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4c, 0x4d, and 0x4e
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/product/lm73
+
+Author: Guillaume Ligneul <guillaume.ligneul@gmail.com>
+Documentation: Chris Verges <kg4ysn@gmail.com>
+
+
+Description
+-----------
+
+The LM73 is a digital temperature sensor.  All temperature values are
+given in degrees Celsius.
+
+Measurement Resolution Support
+------------------------------
+
+The LM73 supports four resolutions, defined in terms of degrees C per
+LSB: 0.25, 0.125, 0.0625, and 0.3125.  Changing the resolution mode
+affects the conversion time of the LM73's analog-to-digital converter.
+From userspace, the desired resolution can be specified as a function of
+conversion time via the 'update_interval' sysfs attribute for the
+device.  This attribute will normalize ranges of input values to the
+maximum times defined for the resolution in the datasheet.
+
+    Resolution    Conv. Time    Input Range
+    (C/LSB)       (msec)        (msec)
+    --------------------------------------
+    0.25          14             0..14
+    0.125         28            15..28
+    0.0625        56            29..56
+    0.03125       112           57..infinity
+    --------------------------------------
+
+The following examples show how the 'update_interval' attribute can be
+used to change the conversion time:
+
+    $ echo 0 > update_interval
+    $ cat update_interval
+    14
+    $ cat temp1_input
+    24250
+
+    $ echo 22 > update_interval
+    $ cat update_interval
+    28
+    $ cat temp1_input
+    24125
+
+    $ echo 56 > update_interval
+    $ cat update_interval
+    56
+    $ cat temp1_input
+    24062
+
+    $ echo 85 > update_interval
+    $ cat update_interval
+    112
+    $ cat temp1_input
+    24031
+
+As shown here, the lm73 driver automatically adjusts any user input for
+'update_interval' via a step function.  Reading back the
+'update_interval' value after a write operation will confirm the
+conversion time actively in use.
+
+Mathematically, the resolution can be derived from the conversion time
+via the following function:
+
+   g(x) = 0.250 * [log(x/14) / log(2)]
+
+where 'x' is the output from 'update_interval' and 'g(x)' is the
+resolution in degrees C per LSB.
+
+Alarm Support
+-------------
+
+The LM73 features a simple over-temperature alarm mechanism.  This
+feature is exposed via the sysfs attributes.
+
+The attributes 'temp1_max_alarm' and 'temp1_min_alarm' are flags
+provided by the LM73 that indicate whether the measured temperature has
+passed the 'temp1_max' and 'temp1_min' thresholds, respectively.  These
+values _must_ be read to clear the registers on the LM73.
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index c365f9beb5dd..e4d75c606c97 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -5,13 +5,13 @@ Supported chips:
   * Linear Technology LTC2978
     Prefix: 'ltc2978'
     Addresses scanned: -
-    Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
+    Datasheet: http://www.linear.com/product/ltc2978
   * Linear Technology LTC3880
     Prefix: 'ltc3880'
     Addresses scanned: -
-    Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
+    Datasheet: http://www.linear.com/product/ltc3880
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261
index eba2e2c4b94d..9378a75c6134 100644
--- a/Documentation/hwmon/ltc4261
+++ b/Documentation/hwmon/ltc4261
@@ -8,7 +8,7 @@ Supported chips:
     Datasheet:
         http://cds.linear.com/docs/Datasheet/42612fb.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
index f8b478076f6d..d59cc7829bec 100644
--- a/Documentation/hwmon/max16064
+++ b/Documentation/hwmon/max16064
@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065
index c11f64a1f2ad..208a29e43010 100644
--- a/Documentation/hwmon/max16065
+++ b/Documentation/hwmon/max16065
@@ -24,7 +24,7 @@ Supported chips:
 	http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
 
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 04482226db20..37cbf472a19d 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -16,8 +16,18 @@ Supported chips:
     Prefixes: 'max34446'
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf
+  * Maxim MAX34460
+    PMBus 12-Channel Voltage Monitor & Sequencer
+    Prefix: 'max34460'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34460.pdf
+  * Maxim MAX34461
+    PMBus 16-Channel Voltage Monitor & Sequencer
+    Prefix: 'max34461'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
@@ -26,6 +36,9 @@ Description
 This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
 Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
 and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
+It also supports the MAX34460 and MAX34461 PMBus Voltage Monitor & Sequencers.
+The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage
+channels.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -109,3 +122,6 @@ temp[1-8]_reset_history	Write any value to reset history.
 
 			temp7 and temp8 attributes only exist for MAX34440.
 			MAX34446 only supports temp[1-3].
+
+MAX34460 supports attribute groups in[1-12] and temp[1-5].
+MAX34461 supports attribute groups in[1-16] and temp[1-5].
diff --git a/Documentation/hwmon/max6697 b/Documentation/hwmon/max6697
new file mode 100644
index 000000000000..6594177ededa
--- /dev/null
+++ b/Documentation/hwmon/max6697
@@ -0,0 +1,58 @@
+Kernel driver max6697
+=====================
+
+Supported chips:
+  * Maxim MAX6581
+    Prefix: 'max6581'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf
+  * Maxim MAX6602
+    Prefix: 'max6602'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf
+  * Maxim MAX6622
+    Prefix: 'max6622'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf
+  * Maxim MAX6636
+    Prefix: 'max6636'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf
+  * Maxim MAX6689
+    Prefix: 'max6689'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf
+  * Maxim MAX6693
+    Prefix: 'max6693'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf
+  * Maxim MAX6694
+    Prefix: 'max6694'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf
+  * Maxim MAX6697
+    Prefix: 'max6697'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf
+  * Maxim MAX6698
+    Prefix: 'max6698'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf
+  * Maxim MAX6699
+    Prefix: 'max6699'
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf
+
+Author:
+    Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for several MAX6697 compatible temperature sensor
+chips. The chips support one local temperature sensor plus four, six, or seven
+remote temperature sensors. Remote temperature sensors are diode-connected
+thermal transitors, except for MAX6698 which supports three diode-connected
+thermal transistors plus three thermistors in addition to the local temperature
+sensor.
+
+The driver provides the following sysfs attributes. temp1 is the local (chip)
+temperature, temp[2..n] are remote temperatures. The actually supported
+per-channel attributes are chip type and channel dependent.
+
+tempX_input      RO temperature
+tempX_max        RW temperature maximum threshold
+tempX_max_alarm  RO temperature maximum threshold alarm
+tempX_crit       RW temperature critical threshold
+tempX_crit_alarm RO temperature critical threshold alarm
+tempX_fault      RO temperature diode fault (remote sensors only)
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
index fe849871df32..e78078638b91 100644
--- a/Documentation/hwmon/max8688
+++ b/Documentation/hwmon/max8688
@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index 3d3a0f97f966..cf756ed48ff9 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -34,7 +34,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: n.a.
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
index 59e316140542..a341eeedab75 100644
--- a/Documentation/hwmon/smm665
+++ b/Documentation/hwmon/smm665
@@ -29,7 +29,7 @@ Supported chips:
       http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
       http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Module Parameters
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 1f4dd855a299..79f8257dd790 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -722,14 +722,14 @@ add/subtract if it has been divided before the add/subtract.
 What to do if a value is found to be invalid, depends on the type of the
 sysfs attribute that is being set. If it is a continuous setting like a
 tempX_max or inX_max attribute, then the value should be clamped to its
-limits using SENSORS_LIMIT(value, min_limit, max_limit). If it is not
-continuous like for example a tempX_type, then when an invalid value is
-written, -EINVAL should be returned.
+limits using clamp_val(value, min_limit, max_limit). If it is not continuous
+like for example a tempX_type, then when an invalid value is written,
+-EINVAL should be returned.
 
 Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees):
 
 	long v = simple_strtol(buf, NULL, 10) / 1000;
-	v = SENSORS_LIMIT(v, -128, 127);
+	v = clamp_val(v, -128, 127);
 	/* write v to register */
 
 Example2, fan divider setting, valid values 2, 4 and 8:
diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000
index 0df5f276505b..805e33edb978 100644
--- a/Documentation/hwmon/ucd9000
+++ b/Documentation/hwmon/ucd9000
@@ -11,7 +11,7 @@ Supported chips:
 	http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
 	http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200
index fd7d07b1908a..1e8060e631bd 100644
--- a/Documentation/hwmon/ucd9200
+++ b/Documentation/hwmon/ucd9200
@@ -15,7 +15,7 @@ Supported chips:
 	http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
 	http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index a995b41724fd..756b57c6b73e 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -54,7 +54,7 @@ http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
 http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
 
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description
@@ -121,12 +121,26 @@ in1_max_alarm		Input voltage high alarm.
 in1_lcrit_alarm		Input voltage critical low alarm.
 in1_crit_alarm		Input voltage critical high alarm.
 
-in2_label		"vout1"
-in2_input		Measured output voltage.
-in2_lcrit		Critical minimum output Voltage.
-in2_crit		Critical maximum output voltage.
-in2_lcrit_alarm		Critical output voltage critical low alarm.
-in2_crit_alarm		Critical output voltage critical high alarm.
+in2_label		"vmon"
+in2_input		Measured voltage on VMON (ZL2004) or VDRV (ZL9101M,
+			ZL9117M) pin. Reported voltage is 16x the voltage on the
+			pin (adjusted internally by the chip).
+in2_lcrit		Critical minumum VMON/VDRV Voltage.
+in2_crit		Critical maximum VMON/VDRV voltage.
+in2_lcrit_alarm		VMON/VDRV voltage critical low alarm.
+in2_crit_alarm		VMON/VDRV voltage critical high alarm.
+
+			vmon attributes are supported on ZL2004, ZL9101M,
+			and ZL9117M only.
+
+inX_label		"vout1"
+inX_input		Measured output voltage.
+inX_lcrit		Critical minimum output Voltage.
+inX_crit		Critical maximum output voltage.
+inX_lcrit_alarm		Critical output voltage critical low alarm.
+inX_crit_alarm		Critical output voltage critical high alarm.
+
+			X is 3 for ZL2004, ZL9101M, and ZL9117M, 2 otherwise.
 
 curr1_label		"iout1"
 curr1_input		Measured output current.