summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/airo.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/airo.c')
-rw-r--r--drivers/net/wireless/airo.c74
1 files changed, 32 insertions, 42 deletions
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 57a79b0475f6..55cf71fbffe3 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -242,9 +242,8 @@ static int airo_perm = 0555;
static int proc_perm = 0644;
MODULE_AUTHOR("Benjamin Reed");
-MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
-cards. Direct support for ISA/PCI/MPI cards and support \
-for PCMCIA when used with airo_cs.");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards. "
+ "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
module_param_array(io, int, NULL, 0);
@@ -252,18 +251,20 @@ module_param_array(irq, int, NULL, 0);
module_param_array(rates, int, NULL, 0);
module_param_array(ssids, charp, NULL, 0);
module_param(auto_wep, int, 0);
-MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \
-the authentication options until an association is made. The value of \
-auto_wep is number of the wep keys to check. A value of 2 will try using \
-the key at index 0 and index 1.");
+MODULE_PARM_DESC(auto_wep,
+ "If non-zero, the driver will keep looping through the authentication options until an association is made. "
+ "The value of auto_wep is number of the wep keys to check. "
+ "A value of 2 will try using the key at index 0 and index 1.");
module_param(aux_bap, int, 0);
-MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \
-than seems to work better for older cards with some older buses. Before \
-switching it checks that the switch is needed.");
+MODULE_PARM_DESC(aux_bap,
+ "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses. "
+ "Before switching it checks that the switch is needed.");
module_param(maxencrypt, int, 0);
-MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \
-encryption. Units are in 512kbs. Zero (default) means there is no limit. \
-Older cards used to be limited to 2mbs (4).");
+MODULE_PARM_DESC(maxencrypt,
+ "The maximum speed that the card can do encryption. "
+ "Units are in 512kbs. "
+ "Zero (default) means there is no limit. "
+ "Older cards used to be limited to 2mbs (4).");
module_param(adhoc, int, 0);
MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
module_param(probe, int, 0);
@@ -1884,7 +1885,7 @@ static int airo_open(struct net_device *dev) {
/* Make sure the card is configured.
* Wireless Extensions may postpone config changes until the card
* is open (to pipeline changes and speed-up card setup). If
- * those changes are not yet commited, do it now - Jean II */
+ * those changes are not yet committed, do it now - Jean II */
if (test_bit(FLAG_COMMIT, &ai->flags)) {
disable_MAC(ai, 1);
writeConfigRid(ai, 1);
@@ -1992,7 +1993,7 @@ static int mpi_send_packet (struct net_device *dev)
/*
* Magic, the cards firmware needs a length count (2 bytes) in the host buffer
* right after TXFID_HDR.The TXFID_HDR contains the status short so payloadlen
- * is immediatly after it. ------------------------------------------------
+ * is immediately after it. ------------------------------------------------
* |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA|
* ------------------------------------------------
*/
@@ -2006,7 +2007,7 @@ static int mpi_send_packet (struct net_device *dev)
sizeof(wifictlhdr8023) + 2 ;
/*
- * Firmware automaticly puts 802 header on so
+ * Firmware automatically puts 802 header on so
* we don't need to account for it in the length
*/
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
@@ -2531,7 +2532,7 @@ static int mpi_init_descriptors (struct airo_info *ai)
/*
* We are setting up three things here:
* 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid.
- * 2) Map PCI memory for issueing commands.
+ * 2) Map PCI memory for issuing commands.
* 3) Allocate memory (shared) to send and receive ethernet frames.
*/
static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci)
@@ -3947,7 +3948,7 @@ static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) {
if ( max_tries == -1 ) {
airo_print_err(ai->dev->name,
- "Max tries exceeded when issueing command");
+ "Max tries exceeded when issuing command");
if (IN4500(ai, COMMAND) & COMMAND_BUSY)
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
return ERROR;
@@ -4173,7 +4174,7 @@ done:
}
/* Note, that we are using BAP1 which is also used by transmit, so
- * make sure this isnt called when a transmit is happening */
+ * make sure this isn't called when a transmit is happening */
static int PC4500_writerid(struct airo_info *ai, u16 rid,
const void *pBuf, int len, int lock)
{
@@ -4500,17 +4501,15 @@ static int setup_proc_entry( struct net_device *dev,
struct proc_dir_entry *entry;
/* First setup the device directory */
strcpy(apriv->proc_name,dev->name);
- apriv->proc_entry = create_proc_entry(apriv->proc_name,
- S_IFDIR|airo_perm,
- airo_entry);
+ apriv->proc_entry = proc_mkdir_mode(apriv->proc_name, airo_perm,
+ airo_entry);
if (!apriv->proc_entry)
goto fail;
apriv->proc_entry->uid = proc_uid;
apriv->proc_entry->gid = proc_gid;
/* Setup the StatsDelta */
- entry = proc_create_data("StatsDelta",
- S_IFREG | (S_IRUGO&proc_perm),
+ entry = proc_create_data("StatsDelta", S_IRUGO & proc_perm,
apriv->proc_entry, &proc_statsdelta_ops, dev);
if (!entry)
goto fail_stats_delta;
@@ -4518,8 +4517,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the Stats */
- entry = proc_create_data("Stats",
- S_IFREG | (S_IRUGO&proc_perm),
+ entry = proc_create_data("Stats", S_IRUGO & proc_perm,
apriv->proc_entry, &proc_stats_ops, dev);
if (!entry)
goto fail_stats;
@@ -4527,8 +4525,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the Status */
- entry = proc_create_data("Status",
- S_IFREG | (S_IRUGO&proc_perm),
+ entry = proc_create_data("Status", S_IRUGO & proc_perm,
apriv->proc_entry, &proc_status_ops, dev);
if (!entry)
goto fail_status;
@@ -4536,8 +4533,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the Config */
- entry = proc_create_data("Config",
- S_IFREG | proc_perm,
+ entry = proc_create_data("Config", proc_perm,
apriv->proc_entry, &proc_config_ops, dev);
if (!entry)
goto fail_config;
@@ -4545,8 +4541,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the SSID */
- entry = proc_create_data("SSID",
- S_IFREG | proc_perm,
+ entry = proc_create_data("SSID", proc_perm,
apriv->proc_entry, &proc_SSID_ops, dev);
if (!entry)
goto fail_ssid;
@@ -4554,8 +4549,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the APList */
- entry = proc_create_data("APList",
- S_IFREG | proc_perm,
+ entry = proc_create_data("APList", proc_perm,
apriv->proc_entry, &proc_APList_ops, dev);
if (!entry)
goto fail_aplist;
@@ -4563,8 +4557,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the BSSList */
- entry = proc_create_data("BSSList",
- S_IFREG | proc_perm,
+ entry = proc_create_data("BSSList", proc_perm,
apriv->proc_entry, &proc_BSSList_ops, dev);
if (!entry)
goto fail_bsslist;
@@ -4572,8 +4565,7 @@ static int setup_proc_entry( struct net_device *dev,
entry->gid = proc_gid;
/* Setup the WepKey */
- entry = proc_create_data("WepKey",
- S_IFREG | proc_perm,
+ entry = proc_create_data("WepKey", proc_perm,
apriv->proc_entry, &proc_wepkey_ops, dev);
if (!entry)
goto fail_wepkey;
@@ -4776,7 +4768,7 @@ static int proc_stats_rid_open( struct inode *inode,
if (!statsLabels[i]) continue;
if (j+strlen(statsLabels[i])+16>4096) {
airo_print_warn(apriv->dev->name,
- "Potentially disasterous buffer overflow averted!");
+ "Potentially disastrous buffer overflow averted!");
break;
}
j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i],
@@ -5705,9 +5697,7 @@ static int __init airo_init_module( void )
{
int i;
- airo_entry = create_proc_entry("driver/aironet",
- S_IFDIR | airo_perm,
- NULL);
+ airo_entry = proc_mkdir_mode("driver/aironet", airo_perm, NULL);
if (airo_entry) {
airo_entry->uid = proc_uid;
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-03 07:39:33 +0000