diff options
Diffstat (limited to 'net/bluetooth/hci_core.c')
-rw-r--r-- | net/bluetooth/hci_core.c | 230 |
1 files changed, 133 insertions, 97 deletions
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index bba4c344c6e0..750d3445f2d2 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -80,7 +80,7 @@ static ssize_t dut_mode_read(struct file *file, char __user *user_buf, struct hci_dev *hdev = file->private_data; char buf[3]; - buf[0] = test_bit(HCI_DUT_MODE, &hdev->dbg_flags) ? 'Y': 'N'; + buf[0] = hci_dev_test_flag(hdev, HCI_DUT_MODE) ? 'Y': 'N'; buf[1] = '\n'; buf[2] = '\0'; return simple_read_from_buffer(user_buf, count, ppos, buf, 2); @@ -106,7 +106,7 @@ static ssize_t dut_mode_write(struct file *file, const char __user *user_buf, if (strtobool(buf, &enable)) return -EINVAL; - if (enable == test_bit(HCI_DUT_MODE, &hdev->dbg_flags)) + if (enable == hci_dev_test_flag(hdev, HCI_DUT_MODE)) return -EALREADY; hci_req_lock(hdev); @@ -127,7 +127,7 @@ static ssize_t dut_mode_write(struct file *file, const char __user *user_buf, if (err < 0) return err; - change_bit(HCI_DUT_MODE, &hdev->dbg_flags); + hci_dev_change_flag(hdev, HCI_DUT_MODE); return count; } @@ -501,7 +501,7 @@ static void le_setup(struct hci_request *req) /* LE-only controllers have LE implicitly enabled */ if (!lmp_bredr_capable(hdev)) - set_bit(HCI_LE_ENABLED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_LE_ENABLED); } static void hci_setup_event_mask(struct hci_request *req) @@ -591,7 +591,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt) if (lmp_bredr_capable(hdev)) bredr_setup(req); else - clear_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); if (lmp_le_capable(hdev)) le_setup(req); @@ -617,7 +617,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt) */ hdev->max_page = 0x01; - if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) { u8 mode = 0x01; hci_req_add(req, HCI_OP_WRITE_SSP_MODE, @@ -656,7 +656,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt) sizeof(cp), &cp); } - if (test_bit(HCI_LINK_SECURITY, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) { u8 enable = 1; hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable), &enable); @@ -693,7 +693,7 @@ static void hci_set_le_support(struct hci_request *req) memset(&cp, 0, sizeof(cp)); - if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { cp.le = 0x01; cp.simul = 0x00; } @@ -881,7 +881,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt) hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); /* Enable Secure Connections if supported and configured */ - if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) && + if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) && bredr_sc_enabled(hdev)) { u8 support = 0x01; @@ -901,7 +901,7 @@ static int __hci_init(struct hci_dev *hdev) /* The Device Under Test (DUT) mode is special and available for * all controller types. So just create it early on. */ - if (test_bit(HCI_SETUP, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_SETUP)) { debugfs_create_file("dut_mode", 0644, hdev->debugfs, hdev, &dut_mode_fops); } @@ -937,8 +937,8 @@ static int __hci_init(struct hci_dev *hdev) * So only when in setup phase or config phase, create the debugfs * entries and register the SMP channels. */ - if (!test_bit(HCI_SETUP, &hdev->dev_flags) && - !test_bit(HCI_CONFIG, &hdev->dev_flags)) + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG)) return 0; hci_debugfs_create_common(hdev); @@ -1300,12 +1300,12 @@ int hci_inquiry(void __user *arg) if (!hdev) return -ENODEV; - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { err = -EBUSY; goto done; } - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { err = -EOPNOTSUPP; goto done; } @@ -1315,7 +1315,7 @@ int hci_inquiry(void __user *arg) goto done; } - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { err = -EOPNOTSUPP; goto done; } @@ -1387,17 +1387,17 @@ static int hci_dev_do_open(struct hci_dev *hdev) hci_req_lock(hdev); - if (test_bit(HCI_UNREGISTER, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { ret = -ENODEV; goto done; } - if (!test_bit(HCI_SETUP, &hdev->dev_flags) && - !test_bit(HCI_CONFIG, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG)) { /* Check for rfkill but allow the HCI setup stage to * proceed (which in itself doesn't cause any RF activity). */ - if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { ret = -ERFKILL; goto done; } @@ -1414,7 +1414,7 @@ static int hci_dev_do_open(struct hci_dev *hdev) * This check is only valid for BR/EDR controllers * since AMP controllers do not have an address. */ - if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) && + if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && hdev->dev_type == HCI_BREDR && !bacmp(&hdev->bdaddr, BDADDR_ANY) && !bacmp(&hdev->static_addr, BDADDR_ANY)) { @@ -1436,7 +1436,7 @@ static int hci_dev_do_open(struct hci_dev *hdev) atomic_set(&hdev->cmd_cnt, 1); set_bit(HCI_INIT, &hdev->flags); - if (test_bit(HCI_SETUP, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_SETUP)) { if (hdev->setup) ret = hdev->setup(hdev); @@ -1448,7 +1448,7 @@ static int hci_dev_do_open(struct hci_dev *hdev) */ if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks)) - set_bit(HCI_UNCONFIGURED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_UNCONFIGURED); /* For an unconfigured controller it is required to * read at least the version information provided by @@ -1458,11 +1458,11 @@ static int hci_dev_do_open(struct hci_dev *hdev) * also the original Bluetooth public device address * will be read using the Read BD Address command. */ - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) ret = __hci_unconf_init(hdev); } - if (test_bit(HCI_CONFIG, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_CONFIG)) { /* If public address change is configured, ensure that * the address gets programmed. If the driver does not * support changing the public address, fail the power @@ -1476,8 +1476,8 @@ static int hci_dev_do_open(struct hci_dev *hdev) } if (!ret) { - if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) && - !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) + if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) ret = __hci_init(hdev); } @@ -1485,13 +1485,13 @@ static int hci_dev_do_open(struct hci_dev *hdev) if (!ret) { hci_dev_hold(hdev); - set_bit(HCI_RPA_EXPIRED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); set_bit(HCI_UP, &hdev->flags); hci_notify(hdev, HCI_DEV_UP); - if (!test_bit(HCI_SETUP, &hdev->dev_flags) && - !test_bit(HCI_CONFIG, &hdev->dev_flags) && - !test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) && - !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) && + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG) && + !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && hdev->dev_type == HCI_BREDR) { hci_dev_lock(hdev); mgmt_powered(hdev, 1); @@ -1543,8 +1543,8 @@ int hci_dev_open(__u16 dev) * HCI_USER_CHANNEL will be set first before attempting to * open the device. */ - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) && - !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { err = -EOPNOTSUPP; goto done; } @@ -1554,7 +1554,7 @@ int hci_dev_open(__u16 dev) * particularly important if the setup procedure has not yet * completed. */ - if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) + if (hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) cancel_delayed_work(&hdev->power_off); /* After this call it is guaranteed that the setup procedure @@ -1569,9 +1569,9 @@ int hci_dev_open(__u16 dev) * is in use this bit will be cleared again and userspace has * to explicitly enable it. */ - if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) && - !test_bit(HCI_MGMT, &hdev->dev_flags)) - set_bit(HCI_BONDABLE, &hdev->dev_flags); + if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + !hci_dev_test_flag(hdev, HCI_MGMT)) + hci_dev_set_flag(hdev, HCI_BONDABLE); err = hci_dev_do_open(hdev); @@ -1601,7 +1601,7 @@ static int hci_dev_do_close(struct hci_dev *hdev) { BT_DBG("%s %p", hdev->name, hdev); - if (!test_bit(HCI_UNREGISTER, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER)) { /* Execute vendor specific shutdown routine */ if (hdev->shutdown) hdev->shutdown(hdev); @@ -1625,17 +1625,17 @@ static int hci_dev_do_close(struct hci_dev *hdev) if (hdev->discov_timeout > 0) { cancel_delayed_work(&hdev->discov_off); hdev->discov_timeout = 0; - clear_bit(HCI_DISCOVERABLE, &hdev->dev_flags); - clear_bit(HCI_LIMITED_DISCOVERABLE, &hdev->dev_flags); + hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); + hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); } - if (test_and_clear_bit(HCI_SERVICE_CACHE, &hdev->dev_flags)) + if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) cancel_delayed_work(&hdev->service_cache); cancel_delayed_work_sync(&hdev->le_scan_disable); cancel_delayed_work_sync(&hdev->le_scan_restart); - if (test_bit(HCI_MGMT, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_MGMT)) cancel_delayed_work_sync(&hdev->rpa_expired); /* Avoid potential lockdep warnings from the *_flush() calls by @@ -1647,7 +1647,7 @@ static int hci_dev_do_close(struct hci_dev *hdev) hci_discovery_set_state(hdev, DISCOVERY_STOPPED); - if (!test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) { + if (!hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) { if (hdev->dev_type == HCI_BREDR) mgmt_powered(hdev, 0); } @@ -1667,8 +1667,8 @@ static int hci_dev_do_close(struct hci_dev *hdev) /* Reset device */ skb_queue_purge(&hdev->cmd_q); atomic_set(&hdev->cmd_cnt, 1); - if (!test_bit(HCI_AUTO_OFF, &hdev->dev_flags) && - !test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) && + if (!hci_dev_test_flag(hdev, HCI_AUTO_OFF) && + !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) { set_bit(HCI_INIT, &hdev->flags); __hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT); @@ -1699,7 +1699,7 @@ static int hci_dev_do_close(struct hci_dev *hdev) /* Clear flags */ hdev->flags &= BIT(HCI_RAW); - hdev->dev_flags &= ~HCI_PERSISTENT_MASK; + hci_dev_clear_volatile_flags(hdev); /* Controller radio is available but is currently powered down */ hdev->amp_status = AMP_STATUS_POWERED_DOWN; @@ -1723,12 +1723,12 @@ int hci_dev_close(__u16 dev) if (!hdev) return -ENODEV; - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { err = -EBUSY; goto done; } - if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) + if (hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) cancel_delayed_work(&hdev->power_off); err = hci_dev_do_close(hdev); @@ -1786,12 +1786,12 @@ int hci_dev_reset(__u16 dev) goto done; } - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { err = -EBUSY; goto done; } - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { err = -EOPNOTSUPP; goto done; } @@ -1812,12 +1812,12 @@ int hci_dev_reset_stat(__u16 dev) if (!hdev) return -ENODEV; - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { ret = -EBUSY; goto done; } - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { ret = -EOPNOTSUPP; goto done; } @@ -1836,29 +1836,29 @@ static void hci_update_scan_state(struct hci_dev *hdev, u8 scan) BT_DBG("%s scan 0x%02x", hdev->name, scan); if ((scan & SCAN_PAGE)) - conn_changed = !test_and_set_bit(HCI_CONNECTABLE, - &hdev->dev_flags); + conn_changed = !hci_dev_test_and_set_flag(hdev, + HCI_CONNECTABLE); else - conn_changed = test_and_clear_bit(HCI_CONNECTABLE, - &hdev->dev_flags); + conn_changed = hci_dev_test_and_clear_flag(hdev, + HCI_CONNECTABLE); if ((scan & SCAN_INQUIRY)) { - discov_changed = !test_and_set_bit(HCI_DISCOVERABLE, - &hdev->dev_flags); + discov_changed = !hci_dev_test_and_set_flag(hdev, + HCI_DISCOVERABLE); } else { - clear_bit(HCI_LIMITED_DISCOVERABLE, &hdev->dev_flags); - discov_changed = test_and_clear_bit(HCI_DISCOVERABLE, - &hdev->dev_flags); + hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); + discov_changed = hci_dev_test_and_clear_flag(hdev, + HCI_DISCOVERABLE); } - if (!test_bit(HCI_MGMT, &hdev->dev_flags)) + if (!hci_dev_test_flag(hdev, HCI_MGMT)) return; if (conn_changed || discov_changed) { /* In case this was disabled through mgmt */ - set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_BREDR_ENABLED); - if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) mgmt_update_adv_data(hdev); mgmt_new_settings(hdev); @@ -1878,12 +1878,12 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg) if (!hdev) return -ENODEV; - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { err = -EBUSY; goto done; } - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { err = -EOPNOTSUPP; goto done; } @@ -1893,7 +1893,7 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg) goto done; } - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { err = -EOPNOTSUPP; goto done; } @@ -1997,7 +1997,7 @@ int hci_get_dev_list(void __user *arg) * is running, but in that case still indicate that the * device is actually down. */ - if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) flags &= ~BIT(HCI_UP); (dr + n)->dev_id = hdev->id; @@ -2035,7 +2035,7 @@ int hci_get_dev_info(void __user *arg) * is running, but in that case still indicate that the * device is actually down. */ - if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) flags = hdev->flags & ~BIT(HCI_UP); else flags = hdev->flags; @@ -2078,16 +2078,16 @@ static int hci_rfkill_set_block(void *data, bool blocked) BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked); - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) return -EBUSY; if (blocked) { - set_bit(HCI_RFKILLED, &hdev->dev_flags); - if (!test_bit(HCI_SETUP, &hdev->dev_flags) && - !test_bit(HCI_CONFIG, &hdev->dev_flags)) + hci_dev_set_flag(hdev, HCI_RFKILLED); + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG)) hci_dev_do_close(hdev); } else { - clear_bit(HCI_RFKILLED, &hdev->dev_flags); + hci_dev_clear_flag(hdev, HCI_RFKILLED); } return 0; @@ -2116,23 +2116,23 @@ static void hci_power_on(struct work_struct *work) * ignored and they need to be checked now. If they are still * valid, it is important to turn the device back off. */ - if (test_bit(HCI_RFKILLED, &hdev->dev_flags) || - test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) || + if (hci_dev_test_flag(hdev, HCI_RFKILLED) || + hci_dev_test_flag(hdev, HCI_UNCONFIGURED) || (hdev->dev_type == HCI_BREDR && !bacmp(&hdev->bdaddr, BDADDR_ANY) && !bacmp(&hdev->static_addr, BDADDR_ANY))) { - clear_bit(HCI_AUTO_OFF, &hdev->dev_flags); + hci_dev_clear_flag(hdev, HCI_AUTO_OFF); hci_dev_do_close(hdev); - } else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) { + } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) { queue_delayed_work(hdev->req_workqueue, &hdev->power_off, HCI_AUTO_OFF_TIMEOUT); } - if (test_and_clear_bit(HCI_SETUP, &hdev->dev_flags)) { + if (hci_dev_test_and_clear_flag(hdev, HCI_SETUP)) { /* For unconfigured devices, set the HCI_RAW flag * so that userspace can easily identify them. */ - if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) set_bit(HCI_RAW, &hdev->flags); /* For fully configured devices, this will send @@ -2143,11 +2143,11 @@ static void hci_power_on(struct work_struct *work) * and no event will be send. */ mgmt_index_added(hdev); - } else if (test_and_clear_bit(HCI_CONFIG, &hdev->dev_flags)) { + } else if (hci_dev_test_and_clear_flag(hdev, HCI_CONFIG)) { /* When the controller is now configured, then it * is important to clear the HCI_RAW flag. */ - if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) + if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) clear_bit(HCI_RAW, &hdev->flags); /* Powering on the controller with HCI_CONFIG set only @@ -2516,6 +2516,42 @@ void hci_remove_irk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 addr_type) } } +bool hci_bdaddr_is_paired(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type) +{ + struct smp_ltk *k; + struct smp_irk *irk; + u8 addr_type; + + if (type == BDADDR_BREDR) { + if (hci_find_link_key(hdev, bdaddr)) + return true; + return false; + } + + /* Convert to HCI addr type which struct smp_ltk uses */ + if (type == BDADDR_LE_PUBLIC) + addr_type = ADDR_LE_DEV_PUBLIC; + else + addr_type = ADDR_LE_DEV_RANDOM; + + irk = hci_get_irk(hdev, bdaddr, addr_type); + if (irk) { + bdaddr = &irk->bdaddr; + addr_type = irk->addr_type; + } + + rcu_read_lock(); + list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { + if (k->bdaddr_type == addr_type && !bacmp(bdaddr, &k->bdaddr)) { + rcu_read_unlock(); + return true; + } + } + rcu_read_unlock(); + + return false; +} + /* HCI command timer function */ static void hci_cmd_timeout(struct work_struct *work) { @@ -2950,7 +2986,7 @@ static void le_scan_restart_work(struct work_struct *work) BT_DBG("%s", hdev->name); /* If controller is not scanning we are done. */ - if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags)) + if (!hci_dev_test_flag(hdev, HCI_LE_SCAN)) return; hci_req_init(&req, hdev); @@ -2983,9 +3019,9 @@ static void le_scan_restart_work(struct work_struct *work) void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *bdaddr_type) { - if (test_bit(HCI_FORCE_STATIC_ADDR, &hdev->dbg_flags) || + if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) || !bacmp(&hdev->bdaddr, BDADDR_ANY) || - (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags) && + (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) && bacmp(&hdev->static_addr, BDADDR_ANY))) { bacpy(bdaddr, &hdev->static_addr); *bdaddr_type = ADDR_LE_DEV_RANDOM; @@ -3153,16 +3189,16 @@ int hci_register_dev(struct hci_dev *hdev) } if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) - set_bit(HCI_RFKILLED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_RFKILLED); - set_bit(HCI_SETUP, &hdev->dev_flags); - set_bit(HCI_AUTO_OFF, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_SETUP); + hci_dev_set_flag(hdev, HCI_AUTO_OFF); if (hdev->dev_type == HCI_BREDR) { /* Assume BR/EDR support until proven otherwise (such as * through reading supported features during init. */ - set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_BREDR_ENABLED); } write_lock(&hci_dev_list_lock); @@ -3173,7 +3209,7 @@ int hci_register_dev(struct hci_dev *hdev) * and should not be included in normal operation. */ if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) - set_bit(HCI_UNCONFIGURED, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_UNCONFIGURED); hci_notify(hdev, HCI_DEV_REG); hci_dev_hold(hdev); @@ -3199,7 +3235,7 @@ void hci_unregister_dev(struct hci_dev *hdev) BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus); - set_bit(HCI_UNREGISTER, &hdev->dev_flags); + hci_dev_set_flag(hdev, HCI_UNREGISTER); id = hdev->id; @@ -3215,8 +3251,8 @@ void hci_unregister_dev(struct hci_dev *hdev) cancel_work_sync(&hdev->power_on); if (!test_bit(HCI_INIT, &hdev->flags) && - !test_bit(HCI_SETUP, &hdev->dev_flags) && - !test_bit(HCI_CONFIG, &hdev->dev_flags)) { + !hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG)) { hci_dev_lock(hdev); mgmt_index_removed(hdev); hci_dev_unlock(hdev); @@ -3890,7 +3926,7 @@ static inline int __get_blocks(struct hci_dev *hdev, struct sk_buff *skb) static void __check_timeout(struct hci_dev *hdev, unsigned int cnt) { - if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { /* ACL tx timeout must be longer than maximum * link supervision timeout (40.9 seconds) */ if (!cnt && time_after(jiffies, hdev->acl_last_tx + @@ -4073,7 +4109,7 @@ static void hci_sched_le(struct hci_dev *hdev) if (!hci_conn_num(hdev, LE_LINK)) return; - if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { /* LE tx timeout must be longer than maximum * link supervision timeout (40.9 seconds) */ if (!hdev->le_cnt && hdev->le_pkts && @@ -4121,7 +4157,7 @@ static void hci_tx_work(struct work_struct *work) BT_DBG("%s acl %d sco %d le %d", hdev->name, hdev->acl_cnt, hdev->sco_cnt, hdev->le_cnt); - if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { /* Schedule queues and send stuff to HCI driver */ hci_sched_acl(hdev); hci_sched_sco(hdev); @@ -4318,7 +4354,7 @@ static void hci_rx_work(struct work_struct *work) hci_send_to_sock(hdev, skb); } - if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { kfree_skb(skb); continue; } |